First Look:

Easy pairing makes wireless Zigbee nets easier to install

By Bernard Cole
iApplianceWeb
(09/23/05, 1:54 PM GMT)

Cambridge, U.K. – In a development that is likely to raise the visibility of the Zigbee wireless LAN control specification in the consumer home and building automation market, Cambridge Consultants has developed an ultra-simple pairing technique for ZigBee enabled connected appliances.   

According to Paul Williamson of Cambridge Consultants, the technique allows end-users to configure ZigBee wireless networks in real world applications - such as determining which lights are controlled  by which switch - without any tools or training. I

t works by exploiting the RSSI (received signal strength indication) data made available by ZigBee silicon solutions. As a result, he said, any ZigBee enabled device - such as a light switch - simply needs an additional pushbutton to initiate the pairing process.  

“To configure the network, the user holds the device close to the chosen ZigBee-enabled appliance, and presses the button,” said Williamson. “A proprietary pairing algorithm in the ZigBee chip then compares the RSSI data received by each node to determine the closest node in the network. The approach eliminates the need for a complex network configuration tool such as a PC, as well as the need and expense of a trained operator.” 

The pairing process can be repeated with other devices to select a group of appliances, and operates in a similar reverse fashion to clear pairings.

The sophisticated algorithm, developed by Cambridge Consultants, automatically manages issues such as the screening effect of a user’s body or an obstacle between the nodes. Once paired, a controlling device can be located anywhere on the network. 

“The technology is equally applicable to individual components such as a light switch, or multi-function controllers such as handheld terminals,” said Williamson. “The required code for the algorithm is very compact, and can be implemented easily on a ZigBee chip.” 

The total bill-of-materials for adding the solution is a few cents worth of  hardware for the pushbutton, and a few kilobytes of code space for the additional firmware. 

"In ZigBee application areas such as building automation, end users require ultra-simple methods of selecting and controlling networked devices," said Williamson. "This 'click & pair' technique provides a very low-tech, consumer-friendly way, of configuring a network. After all, the commercial take-up of a radical new technology like ZigBee depends heavily on how easy it is for consumers to pick up and use". 

He said building and home automation is one major area where Cambridge Consultants see applications for this technology. “In addition to allowing switches to pair with lights," said Williamson, "it can be used for configuring HVAC systems into zones to match office space configurations, or to pair smoke alarms with fire door release mechanisms, emergency lights, sprinklers etc. " 

Other applications can also be found in the industrial automation arena - another major target for ZigBee technology, he said. 

To learn more, go to www.cambridgeconsultants.com.